Expert Answers about Ford F-550 Cab and Chassis

• Receiver Hitch To Replace Pintle Ball Plate On 2015 Ford F550 Cab and Chassis
• I do have an option for you but there is not a receiver hitch available that will bolt into the same bolt hole spacing as the pintle ball hitch. I recommend to add Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty 2-1/2" receiver part # C15845 to the 2015 Ford F550. The Curt hitch will give you 20,000 lbs gross towing weight and then you can use Curt Adjustable 2-Ball Mount part # C45902 that comes with a 2" or 2-5/6" ball. You can also use the Curt Pintle Hook with 2-5/16"...
  view full answer...


• Wiring Adapter for Tekonsha Prodigy P3 on 2016 Ford F-550 Cab and Chassis
• The wiring adapter you will need to install your Tekonsha Prodigy P3 Brake Controller # 90195 on 2016 Ford F-550 Cab and Chassis is the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3034-P.
  view full answer...


• Steering Stabilizer For 2021 Thor Magnitude BB35
• I checked with Roadmaster, and while there is a steering stabilizer for your 2021 Thor Magnitude BB35 Class C on a Ford F-550 chassis, there is not an Exact Center stabilizer, just the Reflex. The correct part number for your Thor is the following: - Roadmaster Reflex Steering Stabilizer # RM55VR There is an Exact Center stabilizer for your '21 Gladiator JT with a lift and 35 inch tires, the Roadmaster Exact Center Steering Stabilizer # RM99RR.
  view full answer...


• 2-1/2" Trailer Hitch Receiver & 7-Way Wiring With Brake Controller For 2024 Ford F-550 Cab & Chassis
• I do see the Curt Trailer Hitch Receiver # C15845 has been confirmed by Curt to fit your 2024 Ford F-550 Cab and Chassis with a 34" wide frame. For the wiring we do have the Curt T-Connector Vehicle Wiring Harness # C69CR which Curt has also confirmed will fit your F-550. This will give you a 7-way connector. The Tekonsha Prodigy P3 Trailer Brake Controller # 90195 along with the Wiring Adapter # 22292 will allow you to plug into the factory wiring connector under your dash.
  view full answer...


• Hitch for a Ford F-550 Van with Large Drop Needed for Clearance
• I have an option for you. After looking at your picture, it looks like the biggest issue is going to be having enough drop to clear the bumper. Given that scenario, I do not believe that a custom fit hitch is going to work for you. The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 is going to be the best route. This is not a class III hitch, but it still has the 2" receiver opening a class III hitch has so you will still be able to use any class III accessories with...
  view full answer...


• Running Board Options for a 2015 Ford F-550 Crew Cab
• I do have similar running board options for your 2015 Ford F-550 Crew Cab but the DeeZee Brite-Tread Running Boards part # DZ2053 are not a confirmed fit. I have attached a list of running boards that are a confirmed fit for your F-550 but out of these options, I recommend the Aries RidgeStep Running Boards part # AA2055524. These running boards are the most similar option we have to the DeeZee Brite-Tread that will fit your F-550. The Aries running boards have a 6-1/2" wide platform,...
  view full answer...


• Heavy Duty Trailer Hitch Receiver Confirmed To Fit a 2022 Ford F-550 Cab and Chassis.
• The Draw-Tite Ultra Frame Trailer Hitch Receiver # DT52MR is our only custom fit receiver for the 2022 Ford F-550 cab and chassis that can be bolted to the frame. Your frame must be 34" wide for this receiver to fit. TorkLift's # TLF1002-30 and their line of receivers currently only have a receiver for the Super Duty line of F-Series trucks and not the cab and chassis. If you look at a hitch like the Buyers Products # 3371809055 it will bolt on but also must be welded a minimum of two...
  view full answer...


• Is Jensen Heavy Duty RV Speaker part # 1103050 Indoor or Outdoor Speaker
• Sorry for any confusion but the Jensen Heavy Duty Outdoor RV Speaker # 1103050 that you referenced is an outdoor speaker. You could use it in an indoor application if you wanted to but it was designed to withstand outdoor use.
  view full answer...


• Will the BOLT Trailer Hitch Receiver Lock Work on 2022 Thor Magnitude on Ford F-550 Chassis
• The BOLT Trailer Hitch Receiver Lock part # BL7023585 is a confirmed fit for a 2022 Thor Magnitude on Ford F-550 Chassis.
  view full answer...


• Grille Guard and Winch Carrier for a 2017 Ford F-550
• Bulldog Winch has a grille guard that is confirmed to fit a 2017 Ford F-550 Cab and Chassis. You get it in either Black # BDW733647B or Chrome # BDW733647. If you are needing headlight guards too we have them for both Black # BDW726647B and Chrome # BDW726647 as well. For a winch carrier we have a few different options that will work with this grille guard. The Winch Carrier # BDW733600 is rated for 9,500 lbs, part # BDW733601 is rated for 12,000 lbs, and part # BDW733604 is rated for...
  view full answer...


• Trailer Hitch for a 2016 Ford F-550 Cab and Chassis with Dump Body
• The Curt Trailer Hitch Receiver part # C15845 that you referenced is a confirmed fit for a 2016 Ford F-550 cab and chassis with frame rails spaced 34" apart (outside to outside). However, Curt does not test this trailer hitch with dump body trucks nor are all dump bodies the same so I would not be able to confirm fit 100%. However, the distance from the mounting flange on the trailer hitch to the top of the receiver tube is around 6" which you should be able to use in addition to the frame...
  view full answer...


• Compatibility of Roadmaster RM55VR Reflex Steering Stabilizer With 2020 Ford F550 Chassis
• According to Roadmaster, the # RM55VR Reflex Steering Stabilizer is compatible with vehicles equipped with a steering damper. The steering damper will remain in place once the steering stabilizer is installed, and will work along with it.
  view full answer...


• Buyers Products Hitch Plate Fit on 2020 Ford F-600
• Buyers Products Hitch plate part # 3371809060A works for your 2020 Ford F-600 as long as your frame measures 34 inches wide on the inside of your frame rails. This hitch isn't a confirmed fit for your application so measuring your frame rails is going to be the best way to determine if the frame is different from the F-550.
  view full answer...


• Correct Trailer Hitch Fit for a 2022 Ford F-450 Cab and Chassis
• The Draw-Tite Trailer Hitch Receiver # DT52MR is a fit for a 2022 Ford F-450 Cab and Chassis. It has a 2" receiver and is rated up to 18,000 lbs.
  view full answer...


• Trailer Hitch and Trailer Wiring For 2020 Hyundai Santa Fe
• The best trailer hitch option for the 2020 Hyundai Santa Fe is the Draw-Tite Class III hitch part # 75908 because the installation process is a bit easier compared to the other options. It is a 2" hitch that does not require drilling for installation. I have attached an installation video for your reference. If you plan on doing some towing and need wiring, I recommend Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # CU94FR. I have attached an installation...
  view full answer...


• Will Curt Echo Wireless C51180 Work In 2021 Ford F-650 With Factory 7-way Connector?
• It sure will! The Curt Echo Wireless Trailer Brake Controller # C51180 you were looking at will work in any vehicle given that it has a functioning 7-way connector. This is a great choice as it can be used in multiple vehicles, and since it plugs directly into your 7-way connector there is no wiring to install it. I included a video of the # C51180 for you to take a look at.
  view full answer...


• Fit of Buyer's Products 3371809030B Hitch Plate on 2020 Ford F-550 Cab/Chassis Truck
• According to Buyer's Products, their # 3371809030B Pintle Hitch Mounting Plate is compatible with your 2020 Ford F-550 cab/chassis.
  view full answer...


• Recommended Trailer Hitch Fit for a 1996 Ford F-550 Cab and Chassis
• I checked with Curt and they show the Curt Trailer Hitch Receiver part # C14082 as a fit for a 1996 Ford F-550 Cab and Chassis. This is a class IV trailer hitch with 2" opening and 12,000 lb weight capacity. It's the highest rated trailer hitch which we currently offer for this vehicle.
  view full answer...


• Is There a Windshield Cover for a 2015 Thor Chateau Ford 550 Diesel 35SK Super Class C
• We do not have a windshield cover that is confirmed to fit your 2015 Thor Chateau Ford 550 Diesel 35SK Super Class C. We do have a universal fit cover that may fit, but you would want to measure to be sure. I have included a diagram with some measurements you can use to verify. - etrailer 2-in-1 Exterior Windshield and Wiper Blade Cover # e98899. The # e98899 is not white, but does have a reflective side that is good for helping to keep the interior of the vehicle cooler.
  view full answer...


• Replacement Shroud for Coleman Mach 3 Plus AC Unit
• Yes, I spoke with my contact at MaxxAir who said that the Coleman Mach 3 and the Mach 3 Plus are the same unit. Since the MaxxAir TuffMaxx Replacement Shroud # MA00-325001 fits the Mach 3 it will also fit your Mach 3 Plus! I have attached a review video as well as a photo showing the dimensions for you to reference.
  view full answer...